New Version iPad Screen Heating Station 110V

New Version iPad Screen Heating Station 110V

To open iPad touch screen, you need to heat the screen in advance. This heating panel is right for you.

Model: CPB280

Specifications: 38*22cm

Voltage: 110V~60Hz

Power: 250-280W (MAX)

Features: Controllable Temperature 30 -100 /p>

(Default 5 Temperature value: 99 80 60 30 10 press the up/down button for 3 seconds to turn the temperature down/up one by one .)

Working Model One:

1. Press the power button for 3 seconds to start up, the default temptature is 60 degrees. The temptature can be adjusted in 30-99 degrees. Press the button on the temptature increase and press the button off the temperature decrease, adjust the output power slightly to enter into constant temperature by reaching setting temperature. The temperature Controller will shutdown automatically in 99 minutes if you don adjust the time after you switch on it.
2. Press the M key to set the shutdown time which can be set between 15-99 minutes. Press the button on the temperature increase and press the button off the temperature decrease, you can also return to temperature setting by pressing M key.

Working Model Two:

1. Press the power button for 3 minutes to start up, then press the M key for 2 seconds to enter into model Two. The machine runs for 5 minutes at full capacity with and stops working after 5 minutes. Then, you can adjust the output power slightly to enter into constant temperature by reaching setting temperature. The machine will begin to operate in constant temperature. If you want to return, press the M key for 2 seconds, and the machine will shut down after 25 minutes.

Warning:

Do not bend.

Do not cut.

Avoid water.

Keep away from Children.